Chenbro SK31101 Installation Guide with 3Gb/s SATA/SAS Bac Manuel d'utilisateur télécharger pdf (Page 10)

SK31101 ver. A2~A4

User

’

s Manual

www.chenbro.com

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]w

Connector & Switch Definition

HDD Failure Signal Connector

This connector is for the SAS / SATA RAID card with HDD failure signal support such as LSI MegaRAID

8308ELP. Connect the 2-pin cable on SK31101 backplane and RAID card to activate the HDD failure LED.

Setting for HDD Failure Signal Cable Connection (SK31101)

Setting for HDD Failure Signal Cable Connection (RAID Card)

Connect the yellow wire of the cable to the CATHODE of the HDD failure connector on RAID card.

Refer to your RAID card’s user manual for the detailed pin definition.

Key Lock

Lock

HDD Failure LED Cable:

26H115311-001

Unloc

1 2 ... 5 6 7 8 9 10 11 12

Pas de commentaire

Chenbro SK31101 Installation Guide with 3Gb/s SATA/SAS Bac Manuel d'utilisateur Page 10